Custom Reflective Iron on "Heat Press" 2" inch Letters
These easy to apply words are created using highly reflective Iron On Material which keeps you visible and safe.
5 colors to choose from
The silver/gray color is Certified EN471, Class II for safety.
The font is Arial Black. (We will cut exactly what you type, so if you want all caps please type in ALL CAPS and vice versa)
Letter size is 2" high.
3 characters total for $6.75 up to 16 characters total for $34.95
Write what word you would like in Add a Note to the Buyer when getting ready to pay.
Can be applied to Cotton, acrylic, polyester and similar fibers.
Application Directions: Using an iron or heat press. (Works fine with household iron) Heat at 300 - 360 degrees for 15 - 20 seconds, medium pressure. Peel cold. Wash Instructions: Temperatures up to 180F degrees inside out.
FREE SHIPPING WITHIN THE USA. MADE IN THE USA!
1 business day
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 14 days of delivery
Ship items back to me within: 30 days of delivery
Request a cancellation within: 12 hours of purchase
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Please contact me if you have any problems with your order.
To apply reflective glass beads just sprinkle the beads on top of paint or the adhesive medium while that medium is still wet or tacky. Be sure not to push the beads down into the medium just sprinkle on top and let dry. If glass beads are pushed down too far into the medium, they will not reflect as well. After the medium dries brush off the beads that did not stick collecting them for later use.
Applying to a vertical surface is tricky. The glamourous way is to use a gravity feed air gun or sandblaster. Most people do not have sandblasters or air guns laying around. Therefore, here is the easiest way we have found. Toss the reflective glass beads onto the wet medium (paint.) Be sure to collect beads using plastic sheeting.
Yes, however reflective glass beads and Lightning Brand Paint are retro-reflective and will reflect back the color of the light source directly back to the source. When there is color underneath the color will show through however, usually lighter than original color depending on the light source.
No, beads need light in order to reflect back that light. It is important to note that even applying a clear coat over the reflective glass beads will greatly reduce or negate reflectivity. Mixing reflective glass beads into paint will only give you a nice texture but no retro-reflection.
The Department of Transportation recommends 5-6 pounds of reflective glass beads for every gallon of paint used. So 2 pounds of glass beads for every quart, 1 pound of beads for every pint. Do not mix beads into paint they will not reflect because glass beads need light in order to reflect light back to the source. A gallon of thick latex/acrylic paint will cover about 80-100 square feet
Reflective glass beads are typically applied to make an object or surface more visible and safe. Over the years we have had many clients use these glass beads in wonderfully creative and unusual ways. For instance, we have had Disney, Hollywood studios and Film companies use the beads for chromatography as well as special effects. Clients have used beads to mark weather balloons, sea buoys, hunting trails, trucks and more. One creative customer used our High Index Glass Beads to enhance the rims of a vintage Ford Model A. Artists use our glass beads in sculptures, paintings, prism light boxes, canoes, fashion, jewelry, signs, urban murals, screen printing and more. What creative idea will you have?
Retro-Reflection happens when light enters the bead finds the edge and is returned directly back to the source of that light only. Retro-reflection is directional. You only see the reflective glass beads reflect when your eyes are at the same level or in between the light source and the beads. Factors that affect the brightness (refractive index) are clarity, roundness and inclusions/air bubbles. The size of the reflective glass bead affects the angles that the bead can reflect.
No, glass beads will not reflect properly because light cannot find the edge of the glass beads in order reflect.
Nov 27, 2021
Didn’t bend during shipping! Yay.
Oct 29, 2021
Excellent seller with a good product and lightning fast shipping. Priority shipping seemed overpriced but it arrived fast and I would defiantly purchase from this seller again.
Oct 28, 2021
Love love love! Ironed on letters to my horses blankets so I can find them in the pasture and they’re visible to hunters and cars if they get out
Oct 17, 2021